How much does it cost to refurbish a violin?

This repair typically requires that a new piece be cut with precision so that it fits perfectly on the violin. This new piece is often included in the cost of the repair, which is $50-70 for student and intermediate-grade instruments, and $70-$100+ for professional violins.

How do you fix a old violin?

7 Violin repairs that must be done by an Expert

  1. Worn or loose fingerboard. …
  2. Fitting a new bridge. …
  3. Setting and moving the sound post. …
  4. Repairing cracks, chips and damage to the wood, and glueing open seams. …
  5. Repairing the varnish – scratches. …
  6. Changing the height of strings at the nut. …
  7. Changing tailpiece and end gut.

How do I know if my violin is worth money?

One of the biggest things to consider with a violin is the quality of sound. If the violin shows a lot of depth and richness (especially on the lower strings), this is a tell-tale sign that it is a valuable instrument. Violins that sound “nasally” and/or “thin” are typically factory-made, and not as valuable.

How much does it cost to replace violin strings?

Violin & ViolaRestring, including tuning$4.00 per string (strings not included)Fit new nut$60.00Compound pegs$25.00Fit pegs$15.00 each, $50.00 setReplace tailgut$30.00

How much does a new violin bow cost?

How Much Are Violin Bows? The price of a violin bow ranges from the reasonable to the ridiculous, but generally speaking, a Brazilwood will typically cost between $50 and $200 and a Pernambuco can set you back, significantly more but are priced anywhere from $200 up to $1,500.

You might be interested:  What are the four strings on a violin

Can you glue a broken violin bridge?

While it is possible to glue it as a temporary fix, I don’t think that it would last long under full string tension (126 lbs or so…) Most luthiers can get a bridge done in a few hours if it’s an emergency. They may charge you extra for the rush job, but it’s worth it.

How can you tell if a violin is vintage?

The first way to tell if your instrument is old (modern), old (actually old) or fake old, is to look for a neck graft. Old violins (and violas and cellos) have neck grafts because they were crafted in an era when instruments had shorter necks.

What finish is used on violins?

Violin varnish is applied with a brush in two or more coats. It is composed of sun-thickened oils such as linseed or walnut, oxidized resins and added coloring matter. Good historic Italian varnish is highly translucent and soft, yet friable. The surface has texture and a delicate patina, not a new car gloss.

How do you sand a violin?

Sand off the old varnish with a fine-grit sanding block. Apply a light amount of pressure and sand in the direction of the grain. Wipe the violin with a soft cloth to remove the sanding dust after sanding off the old varnish. Apply a ground coat to the violin with a small bristle brush.

What makes a violin expensive?

Geographical origin is the most important thing (Italian violins sell for at least six times the price of a comparable French or English violin, and German violins lag far behind). The other factors would be the quality of the craftsmanship (how well regarded the maker is) and the age of the instrument.

You might be interested:  Which wood is best for violin

Who owns the most expensive violin?

This Guarneri del Gesù instrument is now the most expensive violin in the world, selling for an estimated $16million. Its new owner anonymously donated the historic instrument to violinist Anne Akiko Meyers, on loan for the rest of her life.

Leave a Reply

Your email address will not be published. Required fields are marked *