Do lamp harps come in different sizes?

Lamp Harp Types

Our regular harps, which are available with either nickel or brass-plating, range in size from 4” to 15”, while our heavy duty harps, which are also available in nickel and brass plating, come in sizes between 7” and 15”.

How do you measure a harp?

For example, a floor lamp base that’s 60 inches high should have a lampshade between 18 and 30 inches in height. *If the lamp already has a harp and you’re satisfied with its height, simply measure the harp from its top to the base of the electrical socket.

How do you replace a lamp harp?

If you wish to remove the harp, for adjustment or replacement, first unscrew or otherwise remove the lamp finial above the lampshade, remove the shade, and gently squeeze the harp inward just above the harp base. The harp locks into the lamp via notched “legs” that slide into the short slotted arms of the harp base.

What is a harp fitting lamp shade?

Harps are flexible, often U-shaped parts that fit over a lamp’s light bulb, simultaneously protecting the bulb and providing the support or attachment piece for the lampshade. Most often, a harp’s base – the harp saddle – is attached to the lamp beneath the socket.

How do I know if a lamp shade will fit?

To choose the right lamp shade width, measure your lamp base and multiply by two. For a round base, measure straight across; measure diagonally for a square base. The widest part of your shade should be at least a half-inch wider than the widest part of your base on each side.

You might be interested:  What size lamp harp to buy

How do you measure the height of a lamp?

Measure from the surface you are placing the lamp to eye level. This is your base measurement. To find the average height of the shade, divide the base measurement by three. For example, let’s use 18″.

What is the average height of a table lamp?

26 to 34 inches tall

What is a harp on a lamp?

A lamp harp is the component of a lamp to which the lamp shade is attached. … The shade’s internal frame (known as a spider) mounts on this rod and is secured in place by a lamp finial.

How do you make a lampshade fit?

Materials

  1. Step 1: Cut a small piece of tape. Cut a small piece of electrical tape and wrap it around one segment of the ring. …
  2. Step 2: apply tape on all sides. Repeat at each segment of the ring. …
  3. Step 3: Test Ring around Socket. Slide the ring back on the socket. …
  4. Step 4: Replace Bulb. Use an LED bulb to save energy!

What does Spider fit lamp shade mean?

A: spider refers to the cross bar configuration at the top of the shade, which requires a harp fixture rising from the base of the bulb to the top, upon which a screw-on finial holds the whole shade together.

How do you measure a lamp shade fitting?

To determine the correct size glass shade, simply measure the inner diameter of the shade holder (fitter) on your fixture. Common diameters for shade holders are: 2¼”, 3¼”, 4″, 6″, 10″ and 12″. Select a shade with a corresponding fitter diameter.

Leave a Reply

Your email address will not be published. Required fields are marked *