What are the different types of lamp shade fittings?

There are three basic types of lamp shade fittings: spider fittings, uno fittings, and clip-on fittings: Spider Fittings: Spider fittings are the most common type of fitting for table and floor lamps and are used with harps.

How do you know what size harp to buy for a lamp?

Guidelines for determining size of Harp Lamp Shade needed

  1. Height of Lamp Shade: approximately 2/3 rds height of lamp-base. ( height of lamp base: distance from bottom of lamp base to base of lamp socket)
  2. Bottom-diameter of Lamp Shade: approximately 1”-2” less than lamp-base height.

What is a fitter on a lamp shade?

Measuring glass shades & fitters

The fitter is the outer diameter of the lip which is inserted into the fixture’s shade holder. This will measure a little less than the fitter size so it can fit into the shade holder of the same measurement.

How do I know if a lamp shade will fit?

To choose the right lamp shade width, measure your lamp base and multiply by two. For a round base, measure straight across; measure diagonally for a square base. The widest part of your shade should be at least a half-inch wider than the widest part of your base on each side.

What does UNO lamp shade look like?

An uno lamp shade is a type of shade that fits onto a lamp socket with an uno fitter. The uno fitter has arms radiating outward attached to the inside edges of the shade that support a hollow round piece that slides over the socket.

You might be interested:  Who is eligible for harp refinance

How do you measure the height of a lamp?

Measure from the surface you are placing the lamp to eye level. This is your base measurement. To find the average height of the shade, divide the base measurement by three. For example, let’s use 18″.

How far down should a lamp shade go?

The shade should be twice as wide as the lamp base, and one third of the total height of the lamp. So for a 6-inch lamp base, the shade should be at least 12 inches wide. And if the total height of the lamp (including the bulb and harp) is 24 inches, the shade should be 8 inches tall.

How do you attach a lampshade to a lamp?

Put an UNO fitting on smaller table lamps and swing arm wall lamps. An UNO fitting attaches directly to the lamp socket via an inner ring, which is held in place by the bulb. Installing one doesn’t require tools. All you need to do is screw in the bulb and attach the shade.

What are the two types of lamp shades?

Types of Lamp Shade Fitters

  • Spider Fitter Shades. The spider lamp shade is the most common type of fitter for table and floor lamp shades. …
  • Clip-On Fitter Shades. As the name suggests, clip-on lamp shade fitters attach directly onto the light bulb with no additional hardware. …
  • Uno Fitter Shades.

What is slip Uno lamp shade?

Uno lamp shades are more versatile than those with clip-on or spider fitters. They have an inner ring that slips over the socket and are held in place by the bulb. This design makes it simple to replace the bulb.

Leave a Reply

Your email address will not be published. Required fields are marked *