Are you supposed to remove the plastic from lamp shades?

No. The wrapping simply protects the lampshade from being damaged or soiled before it is sold. It should be removed before use. Otherwise, the plastic could shrink and push the shade out of shape, or the heat of the lightbulb could melt the wrapping onto the shade.

How do you determine what size harp to get for a lamp?

Guidelines for determining size of Harp Lamp Shade needed

  1. Height of Lamp Shade: approximately 2/3 rds height of lamp-base. ( height of lamp base: distance from bottom of lamp base to base of lamp socket)
  2. Bottom-diameter of Lamp Shade: approximately 1”-2” less than lamp-base height.

Are plastic lamp shades safe?

Because of the large heat associated with any light bulb, plastic shades are not considered safe for lamps. In fact, there have been several instances where plastic shades have melted or ignited producing toxic smoke and endangering lives.

How do you protect a lamp shade?

Lamps and Shades Should be Packed Separately

  1. Disassemble the lamp.
  2. Discard incandescent bulbs so they don’t break in transit. …
  3. Secure the power cord and wrap to protect the lamp from scratches.
  4. Wrap the harp and finial in packing paper and label.
  5. Use a paper pad to wrap the lamp.

Can you change the harp on a lamp?

If you wish to remove the harp, for adjustment or replacement, first unscrew or otherwise remove the lamp finial above the lampshade, remove the shade, and gently squeeze the harp inward just above the harp base. The harp locks into the lamp via notched “legs” that slide into the short slotted arms of the harp base.

You might be interested:  How to play a jew harp

How do you make a floor lamp shorter?

Unscrew and remove the bulb base so you’re left with your cord wires coming up through the channel at the center of the socket. Unscrew the pieces of your lamp, working from the top down: socket base first, then sections of the support pole until your lamp is as short as you’d like.

What is a harp and finial on a lamp?

A lamp harp is the component of a lamp to which the lamp shade is attached. … The shade’s internal frame (known as a spider) mounts on this rod and is secured in place by a lamp finial.

What is a harp fitting lamp shade?

Harps are flexible, often U-shaped parts that fit over a lamp’s light bulb, simultaneously protecting the bulb and providing the support or attachment piece for the lampshade. Most often, a harp’s base – the harp saddle – is attached to the lamp beneath the socket.

Leave a Reply

Your email address will not be published. Required fields are marked *