Can you use polyurethane on a guitar?

Polyurethane and polyester guitar finishes are considered the industry standard; the modern norm if you will. In mass guitar production, poly finishes largely replaced nitrocellulose lacquers from the late ’60s onwards.

What kind of finish is used on guitars?

There are many different types of finishes for guitars and musical instruments in general, but we could say the most used are: Oils and Waxes. Shellac. Nitrocellulose.

Does poly finish age?

Polyurethane is relatively inert when cured. It doesn’t undergo “aging” as lacquers do. Accellerated aging tests show high-grade polyurethanes to be essentially the same after 50+ years. , plus it inherently takes a higher film thickness to apply poly than lacquer, deadening sound qualities.

What does it mean to Relic A Guitar?

When guitarists discuss relicing a guitar, they are talking about making a newer instrument look worn. This is similar to “wearing in” clothing or deliberately causing something to look more aged. In the guitar market, it can be profitable to relic a guitar. Take caution when you relic your instrument.

How long does it take to Relic A Guitar?

If you’re hankering after the look of a well used 50s or 60s guitar, you’ve near enough answered your own question. Somewhere between 40 & 50 years of fairly hard playing.

How good is wipe on polyurethane?

All but two of the finishes tested fared well, but the Minwax Wipe-On Poly was particularly impressive, drying in three hours to a light satin sheen and offering excellent water resistance. It’s a thin finish that requires more coats to build when brushing, but it still yields good results.

You might be interested:  How to play i walk alone on guitar

How do I know if my guitar has nitrocellulose finish?

Member. Find a hidden area like the control cavity and rub a small spot with a Q-Tip dipped in acetone. If the finish disolves then it is nitrocellulose, if it doesn’t it’s a urethane, polyurethane, or polyester finish. Also, why do people capitalize nitro.

Does Epiphone use nitrocellulose finish?

When it comes to finish, Gibson uses nitrocellulose while Epiphone uses polyurethane. It’s generally assumed that nitrocellulose sounds and ages better but is more fragile and prone to damage.

Does Fender use nitrocellulose?

Nitrocellulose lacquer (“nitro”) was the finish most often used during Fender’s original 1950s and ’60s golden age, although acrylic lacquers were also used. … Fender still uses nitrocellulose lacquer finishes on a select group of instruments (Road Worn™ and American Vintage series, various artist models).

Leave a Reply

Your email address will not be published. Required fields are marked *