Can I plug my guitar into my computer?
The easiest way to connect your electric guitar or bass to your computer is to use one of the small guitar audio interfaces on the market. Just connect the cable from your instrument to the interface and you’re ready to rock. … You plug the guitar into the device and then connect it to the computer USB port.
How do I connect my amp to my computer for recording?
The easiest way to connect the audio output of your computer is to use the “line” output of your sound card. We recommend a stereo 3.5mm mini phone plug to dual RCA cable or mini plug to dual RCA jack adapter with a RCA jack stereo cable to go to the audio input of your sound system, such as the “aux” input.
Can I plug guitar into mic input?
Unfortunately it has no input for an electric guitar to plug straight into it. All it has is a mic in and a line-in input and send. … Guitar pickups are very high impedence devices; most mic preamps don’t deal well with that.
Can I plug a guitar into a line input?
Although the connectors and cables from your typical guitar rig look like they should be compatible with the 1/4″ line-level inputs on a mixing console, they’re not. … Plugging your instrument directly into a console’s line-level input jack usually results in a low-level, wimpy signal.
Where is the audio input on a computer?
The audio input on a desktop computer is usually a 1/8″ mini-jack on the back panel, labeled Line-In or Aux, close to where the speakers will be connected to a similar type of jack. where the arrow points to the outside.
Can you connect a turntable to a computer?
You can connect virtually any turntable to a computer, although for a standard record player, you must pre-amplify the signal. Some modern turntables have a Universal Serial Bus connector that eliminates the need for a separate preamp, allowing you to plug the turntable directly into the computer.
Can I use mic input as line in?
Line inputs are not designed for microphones. Although it is possible to use them and it won’t harm your mic, there is not enough gain to amplify the microphones level to a line input. … If you have a mic with a jack plug on it you should change it for a XLR connector.
Can you connect a guitar to a mixer?
The answer is yes and no! You can plug a guitar or bass into your mixer inputs and it will work (make sure the 48v phantom power is OFF!) Guitarists have been plugging their guitars “straight in” almost since the beginning of time.