What can I use to polish my guitar?
A soft cloth, like an old t-shirt or a sock, will do the job well, along with some water, glass cleaner, and a guitar polish that contains pure carnauba wax. An electric guitar can be cleaned in the same way as an acoustic.
Can you brush on nitrocellulose lacquer?
brushing is not the best way to apply lacquer you will feel it grabing pretty quickly , there is a brushing lacquer but it isn’t great for guitars. If you mask the area the you don’t want over spray you will be better off than brushing.
How do you restore a lacquer finish?
Spray a wet coat of pure lacquer thinner on a surface that has cracks, orange peel or roughness. The thinner will emulsify the surface and the defects should disappear when it hardens again. You can get the same results by spraying a full wet coat of thinned-down lacquer.
Is lacquer shiny?
In modern techniques, lacquer means a range of clear or pigmented finishes that dry by solvent evaporation to produce a hard, durable finish. The finish can be of any sheen level from ultra matte to high gloss, and it can be further polished as required.
How do I know if my guitar has nitrocellulose lacquer finish?
Find a hidden area like the control cavity and rub a small spot with a Q-Tip dipped in acetone. If the finish disolves then it is nitrocellulose, if it doesn’t it’s a urethane, polyurethane, or polyester finish.
What brands of guitars are finished with nitrocellulose lacquer?
Nitrocellulose lacquers have been around for almost a century; originally used for acoustic instruments, saxophones and even cars. This finish later became a popular choice for Fender and Gibson in the ’50s and ’60s, who used it almost exclusively for their electric guitars.
What is the best guitar polish cleaner?
5 BEST GUITAR POLISH & GUITAR CLEANER OPTIONS
- BOSS BDC-01 Microfibre Cloth.
- Planet Waves Untreated Polish Cloth.
- Platinum 65 Suede Microfiber Cloth.
- Dunlop 5400 Polish Cloth.
- Planet Waves Micro-Fiber Polish Cloth.
- Dunlop 5430 Guitar Cleaning Cloth.
Can you polish a guitar with car wax?
Car wax can certainly be applied an acoustic guitar because automotive wax works wonders with satin finishes, even high-end guitar manufacturer ‘Taylor’ guitars even recommend using car wax to polish their products. … Also, do not apply the wax to the fretboard or neck only the main body.
Can I use furniture polish on my guitar?
No, do not use furniture polish anywhere near your guitar. It will dry out any exposed wood and it can perminantly stain some kinds of finish while doing nothing for others.
Should I sand between coats of lacquer?
Between coats, search and slice off bumps, then lightly sand the entire piece with 320-grit before applying the next coat. As you build the finish, and your technique improves, the surface should get progressively smoother. Each coat should require less touch-up.
Can you use a roller for lacquer?
You can use a high-quality sponge roller or low nap velour roller to roll the Lacquer on the surface. Make sure you apply thin coats. Applying the Lacquer too thick or re-coating to quickly can cause a foggy-looking effect. Between coats, you may repeat lightly sanding your piece and wiping it with your tack cloth.