Can a microphone be used with a guitar amp?
Yes, you can use a guitar amp as a speaker to play music or to possibly plug in a microphone. While a guitar amp won’t sound as good as a proper sound system designed to play music, you can achieve decent results when done properly.
How do you mic a small guitar amp?
How to Mic Guitar Amps and Cabs in the Studio
- Tip #1: Place a dynamic mic pointed at the center of the amp’s speaker cone, up against the grille cloth. …
- Tip #2: Point the mic at or near the center of the speaker cone, a short distance away. …
- Tip #3: Place a condenser mic at about a 45 degree angle from the front of the speaker cabinet, about 8 to 12 inches away.
Why do you mic an amp?
The reason you mic it instead of going direct out is because using the mic will give the the natural tone of the amp which will generally sound better than the raw audio signal. … A microphone in front of an amplifier that is carrying a different audio signal won’t feedback just because of its placement.
Can I plug a guitar into a mic input?
A mic input is designed to be much more sensitive than a guitar input, because the magnets in a microphone are smaller and put out lower voltage than the magnets in an electric guitar pickup. … However, if the mic inputs have a “pad,” which is a button that lowers the input, usually by 20db or more, you can use it.
Can I connect microphone to amplifier?
Any microphone is cable of connecting with an amplifier. However, hooking up the microphone does require you to use an adapter as the signal coming from the microphone uses an XLR cable while the amp accepts 1/4-inch connections. …
Can you record electric guitar with a condenser mic?
Dynamic, condenser and ribbon microphones can be used to record electric guitars, but they each serve a different purpose. Some guitarists like to turn it up LOUD. … Dynamic mics are capable of recording extremely high sound pressure levels (SPL) without distorting the signal.
What is the best mic for recording guitar amp?
The 7 Best Microphones for Recording Electric Guitar
- Shure SM57. Common wisdom states that guitar amps are typically recorded with dynamic mics. …
- Sennheiser MD421. Often considered the standard “alternative” to the SM57 on electric guitar… …
- Sennheiser e609. …
- AKG C414. …
- Neumann U87. …
- Royer 121. …
- Beyerdynamic M160.
How loud should my amp be when I record?
Generally, even given these variables, when you’re recording a valve amp that’s in the zone it’s going to be loud enough that you need to shout if you’re in the same room as it and ear protection will be mandatory. We’re probably talking ~110dB+.
Where should I mic my amp?
A good starting place for miking with a typical dynamic mic is halfway between the center and edge of the cone, with the mic capsule pointed directly at the speaker, leaving just enough room to slide your pinky between the mic and grille cloth.
Do you need an amp for a microphone?
The audio signal from microphones is weak, so they need a preamp to translate it into a stronger “Line level” signal. n most cases today, any cheap audio interface will have built-in preamps already, but that doesn’t mean you don’t require an external pre-amplifier.
What do you plug a microphone into?
Microphones will typically plug into one of the following:
- Microphone Preamplifier Input (Mixer, Recorder, Audio Interface).
- In-Line Device (Pad, HPF, Standalone Preamp).
- Audio Snake.
- Speaker Directly.
- Other Devices (Guitar/Bass Amp, Smartphone, Computer, Camera).