How can I play my electric guitar through my PC?

What You Need

  1. Your electric guitar.
  2. Your guitar cable that you would normally plug into the amp.
  3. A laptop, PC, or Mac with an open USB port.
  4. An audio interface.
  5. A USB cable to connect the audio interface to the computer.
  6. DAW software on the computer.

How do I connect an instrument to my computer?

You can connect an electric instrument directly to the computer’s audio-in port, if your computer has one. The computer audio-in port is a 1/8-inch mini input, so you will need an adapter or cable to convert the 1/4-inch phono output from your instrument to the 1/8-inch audio line-in port (mini input) on the computer.

Can I plug a guitar into a line input?

Although the connectors and cables from your typical guitar rig look like they should be compatible with the 1/4″ line-level inputs on a mixing console, they’re not. … Plugging your instrument directly into a console’s line-level input jack usually results in a low-level, wimpy signal.

Can you use iRig on PC?

iPhone, iPad, Mac or PC — iRig HD 2 works everywhere you do. All the cables you need to connect it to the latest devices are included, and iRig HD 2 is class compliant so it works with all your devices and computers.

Can I plug my amp into my interface?

If your amp has a “line out” or headphones jack, then you should be able to connect that to the audio interface. … However do not plug speaker output(s) into the inputs of an audio interface — this will surely break the amp or the interface (or both).

You might be interested:  How to read guitar chord tabs

How do I connect my amp to my computer?

USB Cable

  1. Turn the amplifier and computer off.
  2. Connect the rectangular, flat end of the USB cable to a USB socket on your PC.
  3. Locate the USB connector on the back of your amplifier. …
  4. Turn the amplifier and computer on.

How do I connect my headphones to my guitar?

Simply plug your headphones into the headphones out jack and you’re good to go. While many modern amps provide 3.5mm headphone jacks (1/8″ standard headphone size), some use a 6.3mm (1/4″) output (the same size jack as your guitar cable). You will need to use an adapter to connect your headphones to your guitar amp.

Can I use iRig 2 on PC?

The biggest addition is the 1/4-inch amplifier output, which enables you to use the iRig 2 to integrate your favourite amp/effect modelling software into your real guitar rig. … As well as being compatible with iOS, iRig 2 also works with PC, Mac and certain Android devices.

How do I connect my electric guitar to my Android phone?

Guitar -> AUX cable with ¼” to 3.5mm adapter -> USB sound card input jack -> USB OTG -> Android device, and then USB sound card output jack -> AUX cable -> portable speaker. Your setup will basically look like this: Once you’ve connected everything, just launch the Deplike app on your phone, and begin strumming.

Leave a Reply

Your email address will not be published. Required fields are marked *