How do you care for a satin finish guitar?

For Matte/Satin/Nitro-finished guitars, use only a dry cloth. Refresh the hardware – If you want your hardware to shine, use a soft cloth and a tiny amount of guitar polish to remove dirt or dried sweat. WD-40 can be used to remove thicker grime or rust.

Can you polish a satin finish guitar?

Not to a true high gloss, no. You can buff it out to a semi-gloss, similar to the sheen you see on the seats of worn-out corduroy trousers, but there generally isn’t enough finish material present to get a real shine out of it.

How do you get scratches out of satin finish guitars?

The only way to remove scratches is to lower the surrounding finish to their depth. (Deep ones can sometimes be filled.) With a gloss finish, any number of good mild abrasive guitar polishes can do this and make minor imperfections “disappear.”

Can I use vinegar to clean guitar?

The only household product that’s safe to use to clean your guitar is white distilled vinegar. It will clean the finish, but do you really want a guitar that smells like a pickle? Fig. … A damp paper towel (left) or microfiber cloth works well to clean a guitar’s finish.

What is a satin finish?

This silky, smooth paint finish retains its pearl-like sheen when dry. This finish is also called eggshell. Pros: A satin finish reflects more light than matte and stands up well to washing.

Can I use pledge on my guitar?

Pledge is chock full of silicone oils and should never be used on a guitar. It will make refinishing or finish touchup difficult, even many years later.

You might be interested:  How much is a acoustic guitar

What is the best finish for an acoustic guitar?

Nitrocellulose lacquer

This is traditionally the most common finish used on steel string acoustic guitars. It is very durable and resists scratching. If it is applied too thickly it can crack but when applied well and not too thickly, this is still a very good finish for acoustic guitars.

Can I use furniture polish on my guitar?

No, do not use furniture polish anywhere near your guitar. It will dry out any exposed wood and it can perminantly stain some kinds of finish while doing nothing for others.

How do you dull a glossy finish?

If the finish is thick, you can start with coarse sandpaper, like 220 or 300 grit. Apply some soapy water or mineral spirits to the surface of the piece, and then start sanding the surface. Just a quick once-over will do just fine. Once you’re finished, wipe the surface down, and repeat the process with the next grit.

How do you make a glossy finish?

All you need to do is mix the gloss medium into the paint on the palette, and then paint as normal. The paint should dry to a glossy finish. To achieve even more gloss, apply a high gloss varnish once the painting is finished and the paint is dry.

How do you clean a satin finish neck?

Satin finishes: DO NOT USE oils, polishes, or waxes. To do so would eventually fill in the grain of the wood causing unsightly buildup. Instead, we suggest that you use a slightly damp soft cloth with a dab of mild liquid detergent to clean the soiled areas of the body and the back of the neck.

You might be interested:  How to set up a les paul style guitar

Can you buff scratches out of a guitar?

Buffing scratches is an option if they don’t go too deep. When buffing scratches out, quite literally, finish is being removed until you are at the bottom of the scratch, making the finish a smooth flat surface again. For heavy scratches, wet sanding often precedes buffing.

Leave a Reply

Your email address will not be published. Required fields are marked *